Targeted Oxygen Radical Action Inside Ceramic Traps
Chlorine bleach disinfects but fails to strip mineral deposits. It whitens stains chemically while leaving calcium carbonate structures intact. Sodium percarbonate functions differently. When mixed with water, it dissociates into sodium carbonate and hydrogen peroxide. This reaction generates microscopic oxygen bubbles that physically loosen debris from vitreous china surfaces.
Crucial Criteria to Look For
Active oxygen performance depends entirely on formulation ratios and stabilizer purity. Substandard formulas lose gas volume inside the pouch before you open them.
- Active oxygen yield: Look for at least 13 percent available oxygen by weight to guarantee robust effervescence.
- Moisture barriers: Raw sodium percarbonate degrades in humid air. Look for heavy-gauge multi-layer packaging that keeps ambient water vapor out.
- Synergistic surfactants: Sodium coco-sulfate reduces liquid surface tension, allowing the released oxygen bubbles to cling vertically along the rim.
Common Mistakes to Avoid
Never dump active oxygen powder into boiling water. Water temperatures above 65 degrees Celsius cause thermal decomposition of hydrogen peroxide into plain water and free oxygen too fast. The gas escapes into the air before breaking down waste in the trap. Lukewarm or cold bowl water provides a steady 20-minute oxidation window that lifts stains cleanly.
Recommended Usage Rules
Dose one scoop directly into the trap water every 14 days. Let the dynamic foam climb the bowl walls for 30 minutes before flushing. No heavy scrubbing is required because mechanical gas bubbles do the hard work.